The first thing to check is what’s on the wall. With wallpaper, the new paint can only hold as well as the paper underneath it. An oil-based primer/sealer can help protect ordinary wallpaper from moisture in the new coating, but the paper still needs to be dry and firmly attached. With dark paint, the main challenge is coverage.
A high-hiding primer helps keep the old color from showing through a lighter finish. The steps below take you from checking the surface to applying the final coat. You’ll also see when to strip the wallpaper and what to check before repainting a Dubai rental.
Painting over wallpaper
Painting over wallpaper works best on smooth, dry paper with tight seams. Look around door frames, baseboards, and corners for lifting edges. Check the wall from the side in daylight. A printed pattern can disappear under paint, but an embossed pattern or raised seam can still cast a shadow.
When to paint and when to strip
- Paint over it if the paper is smooth, dry, and firmly attached. An isolated loose seam can be reattached with wallpaper paste if the surrounding paper is sound.
- Test vinyl or glossy wallpaper first if you plan to keep it. Check that your primer is approved for the surface. If you want a smooth finish over a heavily textured wallcovering, strip it.
- Strip it if several seams are lifting or the wallpaper is torn or bubbling. If the wall is damp, find the cause before you cover it.
If you’re painting dark patterned wallpaper a light color, use the test patch to check two things. First, see whether the paper stays flat after priming. Then let the topcoat dry and check whether the print still shows. An extra coat may hide the print, but if a raised seam still casts a shadow, more paint won’t smooth it out.
How to paint over wallpaper in three steps
1. Clean and repair - Wipe off dust and grime without soaking the paper. Let it dry and secure any isolated loose seam. If the wallpaper is sound but you can feel a ridge, check how visible it is inside before deciding whether to keep the paper.
2. Apply an oil-based primer/sealer to a test patch - Pick a small area that crosses a seam. An oil-based primer helps seal ordinary wallpaper. A water-based primer applied directly can loosen the adhesive and cause bubbling or peeling. Stop if the test patch lifts. If the wallpaper was sold as paintable, follow its manufacturer’s instructions.
3. Apply the topcoat - The topcoat is the paint you’ll see when the job is finished. Once the primer is ready to recoat, try a compatible interior paint on the same patch. Check it once dry for visible seams or pattern show-through. If you’re happy with the result, paint the rest of the wall and plan for two finish coats. Follow the product labels for ventilation and recoat times.
Painting a dark wall a lighter color
A sound dark wall can be repainted white, cream, or another light shade. For a big change, such as navy to white, start with a high-hiding primer. It gives the lighter paint an even base and reduces how much of the old shade shows through.
How to cover dark paint in three steps
1. Prepare the surface - When cleaning painted walls, start around switches and doorways, where fingerprints and grime collect. Fill dents, sand the repairs smooth, and remove dust. If the wall is glossy, follow the primer label’s instructions for preparing the surface.
2. Prime and test the new color - Apply a high-hiding primer and follow the paint maker’s recommendation for the primer shade. Test the new color over the primed patch. If you’re comparing paint colors for small spaces, look at the samples beside the trim and floor in daylight and under the lights you use at night.
3. Use a high-opacity topcoat - Choose an interior paint designed for good coverage. Brush around the edges, then roll into them while they’re still wet so the finish blends. Start with two coats, following the label’s recoat time. Once the wall is dry, check it in daylight. If the old color still shows through a smooth area, another coat may help. If you can see a ridge or the paint is lifting, check the surface before recoating.
If the center of the wall looks even but the edges look darker, check how the brushed paint meets the rolled paint. Work in smaller sections on the next coat so you can roll into the brushed edge before it dries.